Gina Pisello

View Original

Circle Segment Sculpture

I have been working for a few weeks on a project and taking pictures of the art in progress. I thought you might like to see how a piece of art goes from concept to completion. I took a series of pictures throughout the process and they appear below with descriptions. You will see that I changed directions along the way. I often begin a piece of art with one idea in mind and as I work other ideas surface and demand to be given a chance. I like the end result of this project and hope you do too. I still need to come up with a name so if you have any suggestions please leave them in the comments section. Thanks for stopping by.

~Gina

See this content in the original post

 The idea for this piece came from a segment I saw on Antiques Roadshow some time ago. This guy brought a round table in that was made of six curved parts. It turned out that each part had its own set of legs and could, therefore be deconstructed and rearranged into different configurations. I loved it instantly and drew a sketch to save for later. I made my circle and segments from foam core using a circle cutter to make the cuts.

See this content in the original post

 At first I planned to make this with a top and bottom piece suspended with wooden dowels. I made a couple of segments to try out the concept and played with different origami objects to place inside.

See this content in the original post

Here are some of the parts and tools I used at this stage to create the interior space. After I lined up the two segments I didn't like the open feeling of the piece, but wanted it to have thickness. I decided to undo this work but save the cut pieces. I ended up cutting out 3 circles and segmenting them to make the final circle form.

See this content in the original post

 This is a picture of the open space design with an origami butterfly suspended in the middle on a pin. I ended up changing the concept entirely.

See this content in the original post

Here is one segment wrapped in Japanese paper the meld the three pieces of foam core together. I ended up painting the sides the match the colors of the top. See the next few pictures.

See this content in the original post

 This painting for the top of the circle started out as just a sample. I ended up liking it so much that I used it on the final work. I love the way the gold and blue work together. I used the circle stencil to mask the center, which was originally black, so that I could paint it gold to match the gold stencil work.

See this content in the original post

 My favorite configuration for these segments is the one shown above. before I glued the cut paper wedges to the foam core I played around with their arrangement once the circle design was broken up. I was surprised that the design worked so well after being broken apart and reformed.

See this content in the original post

When I was satisfied with the look of the design, I glued the watercolor paper design onto the six segments being careful to align each piece with the edges of the foam core base.

See this content in the original post

Then I rearranged the segments into my favorite shape and turned the pieces over. 

See this content in the original post

I decided to use a piece of Japanese paper (the same kind I used for the sides of each segment) with writing on it for the back. I laid a sheet of paper beneath this shape and traced each segment in pencil. Then I used a divider with pencil lead to trace a 1/8th inch indent. I cut out the paper and glued it down.

See this content in the original post

This is how the back looks when the piece is returned to its circle form. I still prefer the shape above, but this looks good too. What do you think?